• Security
  • Cisco ASA Failover Best Practice


    Here’s the recommended best practice to configure Failover on Cisco ASA. Active unit: interface Ethernet0/0  duplex full  nameif outside ip address standby no shutdown interface Ethernet0/1  duplex full  nameif inside  ip address standby no shutdown interface Ethernet0/2  description STATE Failover Interface no shutdown interface Ethernet0/3  description LAN Failover Interface […]

  • Security
  • Fortigate NAT DMZ

    FG NAT

    To create outside NAT in the DMZ, first make sure you have configured the policy and NAT for LAN users to access the internet. config firewall policy edit 1 set srcintf “port3” set dstintf “port1” set srcaddr “all” set dstaddr “all” set action accept set schedule “always” set service “ALL” set nat enable end When […]

  • Security
  • Reset Fortigate Password


    Everybody has ever forgotten their password once. That’s when this tutorial comes in handy, if you forgot your Fortigate password (or even if you want to reset any Fortigate password). This will require physical access to the Fortigate and a reboot of the unit. Here are the steps: Connect console cable to the Fortigate unit. […]